Helene's surface properties from a photometric multi-wavelength analysis
Icarus Elsevier 392 (2022) 115376
Abstract:
On January 31, 2011, the remote-sensing instruments onboard the Cassini spacecraft (UVIS (Ultraviolet Imaging Spectrograph; ISS (Imaging Science Subsystem); VIMS (Visual and Infrared Mapping Spectrometer) and CIRS (Composite Infrared Spectrometer)) observed Helene, Dione's leading Lagrangian moon. We report here on the photometric characteristics of Helene between 0.11 μm and 5.2 μm. We find that Helene's spectrum is dominated by the signature of water-ice and we retrieve a grain size of 3.4 μm in the ultraviolet. At all wavelengths, Helene shows signs of being a relatively fresh surface less affected by space weathering effects than other observed surfaces in the Saturn system. We present the first phase curve of Helene at 0.61 μm and place our ultraviolet and near-IR results in a wider spectral context toward a better understanding of Helene's surface evolution. Previous studies suggested that either a recent impact on Helene or an asymmetric flux of E-ring particles could explain the satellite high surface brightness (Hedman et al., 2020). Results from this study favor the impactor hypothesis to explain Helene's photometric behavior.Constraining Enceladus' heat flow between its tiger stripes
Copernicus Publications (2022)
Constraining Enceladus’ energy emission outside the South Polar Terrain
Copernicus Publications (2022)
Dione's thermal inertia and bolometric Bond albedo derived from Cassini/CIRS observations of solar eclipse ingress
The Planetary Science Journal IOP Publishing 3:8 (2022) 192
Abstract:
On 2010 May 18 Cassini's Composite Infrared Spectrometer (CIRS) observed Dione's leading hemisphere as its surface went into solar eclipse. Surface temperatures derived from each of CIRS' focal plane 3 (FP3, 600−1100 cm−1) show a rapid decrease in Dione's surface temperature upon eclipse ingress. This change was compared to the model surface emission to constrain bolometric Bond albedo and thermal inertia. Seven FP3 detectors were able to constrain the observed surface's thermophysical properties. The bolometric Bond albedo derived from these detectors are consistent with one another (0.54 ± 0.05 to 0.62 ± 0.03) and that of diurnal studies (e.g., 0.49 ± 0.11, Howett et al. 2014). This indicates that Dione's albedo is uniform to within the uncertainties across the observed region of its leading hemisphere. The derived thermal inertias are consistent across detectors, 9 ± 4 J m−2 K−1 s−1/2 (MKS) to 16 ± 8 MKS, and with previous diurnal studies (e.g., 8 to 12 MKS, Howett et al. 2014). The skin depth probed by the eclipse thermal wave is ∼0.6–1 mm, which is much shallower than that probed by diurnal cycles (∼50 mm). Thus, the agreement in thermal inertia between the eclipse and diurnal studies indicates that Dione's subsurface structure is uniform from submillimeter to subcentimeter depths. This is different from the Jovian system, where eclipse-derived thermal inertias are much lower than those derived from diurnal studies. The cause of this difference is not known, but one possibility is that the E-ring grains that bombard Dione's leading hemisphere overturn it, causing uniformity to centimeter depths.Charon’s refractory factory
Science Advances American Association for the Advancement of Science 8:24 (2022) eabq5701